Power Source
53
Product Overview
2
Switch the power off at the end of the day or when not using the machine for an extended
period of time.
Use also the Energy Saver feature to save power consumption while the machine is not in
use.
For information on the Energy Saver feature, refer to "Energy Saver Mode" (P.58).
Important • If the power is switched off, all the services of the machine will stop. When using the machine
throughout the day for jobs such as receiving fax, do not switch the power off.
1 Press the power switch to the [ | ] position to
switch the power on.
z
When the Finisher-B1 (optional), the Finisher-
C1 (optional), or the Finisher-C1 with Booklet
Maker (optional) is installed.
Note • The “Please wait...” message indicates that
the machine is warming up. The machine is
not available during warming up.
• If the machine does not power on, check the
following:
- The power cord is plugged in.
- The main power is switched on.
- The <RESET> button is set on and is in the
depressed position.
Switching the Power Off
The following describes how to switch the power off.
1 Before switching the power off, make sure that the machine has completed all copy or print
jobs. Then, make sure that the <Data> indicator is not blinking.
Important • Do not switch the power off in the following situations. If the power is switched off, the processing
data may be erased.
- While data is being received
- While a job is being printed
- While a job is being copied
- While a job is being scanned
• When switching the power off, wait 5 seconds after outputs have been delivered.
To Next Page
Loading...
Need help?
General
