Output Format
147
Copy
3
Folding (Outputting Bi-Folded/Tri-Folded Paper)
This feature allows you to fold copies in half, or crease in half.
Important • When the Finisher-B1 or the Finisher-C1 is installed, do not remove output copies from the finisher
tray until all the output copies have been delivered.
Note • The supported paper orientation is only . Select the tray whose orientation is set to .
• This feature does not appear for some models. An optional component is required. For more
information, contact our Customer Support Center.
1 Select [Folding].
2 Select any option.
îš„ Off
Does not fold copies.
îš„ Single Fold
This option is displayed when the Booklet Maker Unit for Finisher-B1 (optional) or the
Finisher-C1 with Booklet Maker (optional) is installed.
When the the Booklet Maker Unit for Finisher-B1 (optional) is installed:
Creases copies in half.
When the Finisher-C1 with Booklet Maker (optional) is installed:
Folds copies in half.
Preset Repeat Image (Making Multiple Copies on a Single Sheet)
This feature allows you to repeatedly copy one original onto equally divided areas according
to the specified number of copies.
To Next Page
Loading...
Need help?
General
