Safety Notes
21
Before Using the Machine
1
Machine Installation
Switch off the power and then the main power inside the body front cover, and
unplug the product when it (i.e., fax function) is not used over weekends or long
holidays. Please note that it cannot receive fax message during switch-off.
Once a month, switch off this product and check if
z
the power cord is plugged firmly into an electrical outlet;
z
the plug is not excessively heated, rusted or bent;
z
the plug and electrical outlet are free of dust; and
z
the power cord is not cracked or worn down.
Once you notice any unusual condition, switch off the power and then the main
power inside the body front cover, and unplug the power cord. Contact your local
Fuji Xerox representative.
Do not locate this product where people might step on or trip over the power cord.
Friction or excessive pressure may generate heat and eventually cause electric
shock or a fire accident.
Never locate this product in the following places:
z
Near radiators or any other heat sources
z
Near volatile flammable materials such as curtains
z
In the hot, humid, dusty or poorly ventilated environment
z
In the place receiving direct sunlight
z
Near cookers or humidifiers
Locate this product on a level and sturdy surface that can withstand a weight of
290 Kg (maximum weight when Large Size Color UI, Finisher-C1 with Booklet
Maker, Side Tray, and HCF B1 are installed to Three Tray Module Model). Otherwise,
if tilted, the product may fall over and cause injuries.
Locate this product in a well-ventilated area. Do not obstruct ventilation openings
of the product.
Keep the minimum clearance as follows for ventilation and an access to the power
plug. Unplug the product if an abnormal condition is noted.
To Next Page
Loading...
Need help?
General
