5 Scan
346
Scan
5
îš„ Auto Name
The file name is "img-xxx" (where xxx is the date and time).
Note • If a file name is deleted, [(Auto Set)] is displayed.
îš„ To set the file name
1 Select [File Name].
2 Up to 28 characters can be entered as a file name using the displayed keyboard.
Note • If a document stored in a folder of the machine is imported to a computer, the specified name may
not be reflected on it depending on import method.
For information on how to enter characters, refer to "Entering Text" (P.73).
Encryption (Sending E-mail Encrypted by S/MIME)
When using the E-mail service, you can send e-mail encrypted by S/MIME.
When sending encrypted e-mail, select an e-mail address associated with a certificate that
can be encrypted, from the Address Book.
Note • You can change the default value of [E-mail Encryption] in the System Administration mode. For
information on how to change the default value, refer to "5 Tools" > "Scan Service Settings" > "Scan
Defaults" > "E-mail Encryption" in the Administrator Guide.
• This feature is supported only by the ApeosPort series.
îš„ Off
Sends e-mail without encryption.
îš„ On
Sends e-mail with encryption.
Digital Signature (Sending E-mail with a Digital Signature by S/MIME)
When using the E-mail service, you can send e-mail with a digital signature by
S/MIME.
Digital Signature allows a recipient to confirm whether contents of the e-mail are changed,
or whether the e-mail is sent from the proper sender.
To use this feature, the machine's mail address must be linked to a certificate.
Note • This feature is supported only by the ApeosPort series.
For information on how to link a certificate to the machine’s e-mail address, refer to "12 Encryption and Digital Signature
Settings" > "Configuration of E-mail Encryption/Digital Signature" in the Administrator Guide.
îš„ Off
Sends e-mail without a digital signature.
îš„ On
Sends e-mail with a digital signature.
Login Name
You can use this feature to enter the login name for a destination server.
Note • This feature is displayed only when [Network Scanning] is selected on the [Services Home] screen.
To Next Page
Loading...
Need help?
General
