4 Fax
264
Fax
4
3
Select [Manual Send] from the drop-down
menu.
4
Use the keyboard displayed on the touch screen to enter numbers in the following format.
Note • You can specify up to 20 locations for relay recipients.
F Code Method
You can perform Relay Broadcast by registering the relay station’s F code and password (if
necessary) to the machine.
Note • When performing Relay Broadcast with the F Code method, you can use a password if you set a
receive password for the relay station.
• When performing Relay Broadcast between Fuji Xerox manufactured machines that can be used as
both an initiating station and a relay station, we recommend that you use the fax signal method.
• Confirm the F code (sub-address) and password of the target relay station.
1
Select the [Fax/Internet Fax Options] tab to
display the [Fax/Internet Fax Options] screen.
2
Select [F Code].
3
Select [On].
Relay station
telephone
number
Facsimile tone
Password
Beep!
Beep!
Relay
station
ID
Address
number
To Next Page
Loading...
Need help?
General
