2 Product Overview
76
Product Overview
2
Exiting the Power Saver Mode
The machine exits the Power Saver mode by the following instances:
Pressing the <Power Saver> button on the control panel
Receiving jobs such as print and fax
Selecting [Apply] in CentreWare Internet Services
Opening the document cover
Note • When the machine is in the Sleep mode, it takes longer time to exit the Power Saver mode than
when the machine is in the Low Power mode.
When the following devices are connected to the machine and a user performs the following
operation, the Low Power mode can be deactivated without pressing the <Power Saver>
button.
Touching the IC card Reader (optional) with a card
Note • The Sleep mode cannot be deactivated by the operation. When the IC Card Reader (optional) is
connected to the machine, you can make the machine exit the Power Saver mode without pressing
the <Power Saver> button by setting longer time to elapse until the machine enters the Sleep mode.
• When the machine enters the Sleep mode with the IC Card Reader (optional) connected, it may take
longer time to exit the Power Saver mode.