EasyManuals Logo
Home>Fuji Xerox>Printer>DocuPrint C2120

Fuji Xerox DocuPrint C2120 User Manual

Fuji Xerox DocuPrint C2120
206 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #89 background imageLoading...
Page #89 background image
5.2 Description of Menu Items 89
Protocol Select [Enable] when using the protocol. When [Disable] is selected, the
protocol cannot be activated.
[LPD] (default: [Enable])
[Port9100] (default: [Enable])
[IPP] (default: [Enable])
[SMB (TCP/IP)] (default: [Enable])
[SMB (NetBEUI)] (default: [Enable])
[FTP] (default: [Enable])
[WSD] (default: [Enable])
[E-mail Printing] (default: [Enable])
[SNMP]-[SNMP (UDP/IP)] (default: [Enable])
[StatusMessenger] (default: [Enable])
[InternetServices] (default: [Enable])
[Bonjour (mDNS)] (default: [Enable])
[Telnet] (default: [Enable])
[HTTP - SSL/TLS] (default: [Enable])
Note
[HTTP - SSL/TLS] appears only when a certificate is registered on the
printer.
For details on encrypting HTTP communication and a certificate required
for the printer, refer to "SSL Data Encryption for HTTP Communication" (P.
149).
[HTTP - SSL/TLS] does not appear on the model sold in China.
IP Filter Specifies blocking the reception of data from certain IP addresses.
No. n
(n:1 to 5)
You can set up to five IP addresses ([No. 1] to [No. 5]). [No. 1] has priority
over the others. To set multiple filters, set IP address in descending order from
the address network with the narrowest range.
[Address]
Enter the IP addresses using numbers between 1 and 255. The first xxx,
however, cannot be 127 or a number between 224 and 255.
[Mask]
Enter the subnet masks using the following numbers:
0, 128, 192, 224, 240, 248, 252, 254, and 255.
[Mode]
Sets the restriction conditions for the addresses from [Off] (default),
[Accept], or [Reject].
Note
[IP filter] can be set also on CentreWare Internet Services. For details, refer
to
"Controlling Data Reception by IP Address" (P. 153).
IEEE 802.1x Disables the IEEE 802.1x feature.
Note
[IEEE 802.1x] appears only when the feature is enabled.
[IEEE 802.1x] appears when using the wired network only.
[IEEE 802.1x] does not appear on the model sold in China.
Initialize NVM Initializes network data stored in NVM. The NV memory is nonvolatile memory
that retains the settings of the printer even when its power is switched off.
Initializing the NV memory will return each item of the [Wired Network] menu
to its default value.
Item Description

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fuji Xerox DocuPrint C2120 and is the answer not in the manual?

Fuji Xerox DocuPrint C2120 Specifications

General IconGeneral
BrandFuji Xerox
ModelDocuPrint C2120
CategoryPrinter
LanguageEnglish

Related product manuals