3.2 Printing on Envelopes 45
3.2 Printing on Envelopes
This section explains how to print on envelopes.
Loading Envelopes
Feeding Envelopes in the Manual Feeder
Feed envelopes one by one with the address side facing down. The orientation and
handling of envelope flaps is as follows.
Note:
• Set [Portrait & Landscape (For envelopes)] on the print driver.
• Envelops may wrinkle sometimes. In that case, rotate the envelope so that the flap comes to the left side
of the feeder, and try again.
Loading Envelopes in Tray 1
Load envelopes in Tray 1 with the address side facing up. The orientation and handling of
envelope flaps is as follows.
Envelope orientation and feed direction
• Address side face down
• Flap closed and at the right
• Address side face down
• Flap closed and facing inward
• Address side face down
• Flap open and facing outward
Envelope orientation and feed direction
• Address side face up
• Flap closed and at the right in the tray
• Address side face up
• Flap closed and facing frontward in the tray.
aper
ee
rec
on
Paper feed direction
aper
ee
rec
on
Paper feed direction
Paper feed direction
To Next Page
Loading...
Need help?
General
