EasyManuals Logo
Home>Fuji Xerox>Printer>DocuPrint C5005 d

Fuji Xerox DocuPrint C5005 d User Manual

Fuji Xerox DocuPrint C5005 d
462 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #348 background imageLoading...
Page #348 background image
348 7 Maintenance
5. After all the settings are completed, click [Apply].
Secure Watermark
Important
Secure Watermark does not operate correctly when printing over an IPv6 network.
This feature performs hidden printing of a watermark control code (digital code) on all
pages. This feature protects the printed document by forcibly canceling any copy, scan, of
fax job attempted on a watermark secure device. Should an information leak occur, a
special application can be used to trace when, where, and by whom an output operation
was performed.
Note
For information about performing hidden printing of text strings, refer to “Watermark” (P. 347).
The Fuji Xerox ApeosWare Secure Watermark Analyzer application (purchase separately) is required to
analyze digital codes. Contact your dealer for details.
1. Launch your web browser and access CentreWare Internet Services.
Note
For information on how to access CentreWare Internet Services, refer to “1.6 Configuring the Printer
Using CentreWare Internet Services” (P. 41).
If you are prompted to enter the administrator's ID and password, enter them and click [OK].
2. Click the [Properties] tab.
3. On the menu on the left, click [Security] > [Watermark] > [Secure Watermark].
The [Secure Watermark] dialog box appears.
4. Configure the settings.
Watermark / Background
Contrast
Specifies the contrast between the text and background for the
watermark. Contrast can be set as a value from 1 to 9.
Note
Text/background contrast can be checked by printing the [Watermark
Sample List].
Client Print Specifies whether or not watermarks are printed automatically when
printing from a client computer.
[Off]
•[On]
Force Print If [Allow Device Settings to Override] is set, instruction from the client to
perform Watermark or Secure Watermark features will be ignored, when
[On] is specified in [Client Print] in the printer. You need
TrustMarkingBasic (purchase separately) to instruct from the client to
perform Watermark or Secure Watermark features.
[Allow Device Settings to Override]
[Allow Client Settings to Override]
Note
The setting method applies to both the Watermark and Secure
Watermark features.
Setting Description

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fuji Xerox DocuPrint C5005 d and is the answer not in the manual?

Fuji Xerox DocuPrint C5005 d Specifications

General IconGeneral
BrandFuji Xerox
ModelDocuPrint C5005 d
CategoryPrinter
LanguageEnglish

Related product manuals