402 A Appendix
A.3 Life of Consumables and Regular
Replacement Parts
Life of Consumables
Important
• Toner
Reference values are measured based on ISO/IEC19798. Actual replacement cycles depend on printing
conditions, output contents, paper size and type, and environment.
•Drum
The number of printed pages is a reference value based on A4-size one-sided printing of an average
of three continuous sheets per print job. The actual number of printable pages depends on the
conditions defined above, in addition to the number of continuous prints, paper size, paper type, paper
feed direction, paper tray and output tray settings, monochrome/color auto selection
*
, other mode
selections, the initialization operation performed when the printer power is turned on or off, adjustments
to maintain print quality, and other operating environment conditions. Certain conditions may result in
actual values that are half those shown in the table. The values presented here are for reference only.
* When [Color] is selected on the printer, certain data may use the color drum even when printing a
monochrome page.
• Waste toner bottle
The number of printable pages is based on continuous printing of A4 -size, portrait orientation, one-
sided prints, with an image density of 5% for each color, and a color-to-monochrome ratio of 6:4. Actual
replacement cycles depend on printing conditions, output contents, paper size and type, and
environment.
• Fusing unit
The replacement cycles are targets based on continuous, one-sided printing on A4-size plain paper.
The actual number of printable pages can vary greatly from these values due to paper size and type,
printing environment and other printing conditions, such as the frequency of power-ups. This is because
the indicated number of pages are calculated based on estimations of factors that influence actual
replacement part life.
Though the deciding factor for the life of fusing unit, for example, is power on time, this is converted and
indicated as number of print pages.
• 160K and 200K maintenance kit
The printer has certain components that need to be replaced periodically in order to maintain its
functionality and performance. These components are called the regular replacement parts.
The replacement cycles are targets based on continuous, one-sided printing on A4-size plain paper. The
actual number of printable pages can vary greatly from these values due to paper size and type, printing
environment and other printing conditions, such as the frequency of power-ups. This is because the
indicated number of pages are calculated based on estimations of factors that influence actual
replacement part life.
A warning message appears about 1,500 sheets prior to when replacement is necessary for the 160K
Maintenance kit, and 200K Maintenance kit.
Consumables Page Yield
Toner cartridge (black) Approx. 26,000 pages
Toner cartridge
(cyan/magenta/yellow)
Approx. 25,000
*
pages
Drum cartridge Approx. 70,000 pages
Waste toner bottle Approx. 29,000 pages
Fusing unit Approx. 360,000 pages
160K Maintenance kit (IBT Belt Cleaner Assy, Odor Filter, Suction Filter) Approx. 160,000 pages
200K Maintenance kit (2nd BTR Unit, Paper Feed Rolls) Approx. 200,000 pages
*: The number of printable pages with the toner cartridges that came with the printer are approximately 26,000 pages with the
Black one, and 15,000 pages with the Cyan, Magenta, or Yellow one respectively.
To Next Page
Loading...
Need help?
General
