7.1 Replacing Consumables 305
Replacing Staple Cartridge
When the staple cartridge needs to be replaced, a message appears on the display. When
this message appears, load a new staple case into the staple cartridge.
Important
• The use of staple cartridges not recommended by Fuji Xerox may degrade quality and performance. Use
only staple cartridges recommended by Fuji Xerox.
Replacement Procedure (for Finisher-B1)
When the message Staple Cartridge R1 is displayed on the display, follow the instruction
below to replace the staple cartridge with a new one.
1. Make sure that the machine is not
operating, and open the front door.
2. Grasp the handle R1 of the staple cartridge
holder, and pull out the holder to the right,
towards you.
3. Take the staple cartridge out of the finisher.
Note
• The staple cartridge is firmly inserted. A slight force is
required to pull the cartridge out of the finisher.
4. Pinch both sides of the empty staple case
with your fingers (1), and remove the staple
case from the cartridge (2).
To Next Page
Loading...
Need help?
General
