372 7 Maintenance
Note
• You can select multiple smart cards, but the card detection time increases in proportion to the number of
cards selected. We recommend that you select the required cards only.
12. Click the [Edit] button for the smart card with which [Enabled] check box is selected.
13. Configure required settings. Click [Apply].
14. To encrypt the smart card information, click the [Encrypt] button in [Encryption
Settings].
Important
• Once you encrypt the smart card information, you cannot view or edit the information later. Also, when
you click the [Decrypt] button, the information is reset to the default. You should backup the smart card
information before encryption. You can backup the smart card setting using [Cloning]. For more
information, refer to the online help for CentreWare Internet Services.
15. Click [Certificate Settings] in the [Smart Card Settings] on the left menu.
16. Specify the OID Certificate for the smart card authentication in the [Object Identifier of
Authentication Certificate].
17. Specify the OID Certificate for the smart card signature in the [Object Identifier of
Signing Certificate].
18. Specify the OID Certificate for the smart card encryption in the [Object Identifier of
Encryption Certificate].
19. Click [Apply].
To Next Page
Loading...
Need help?
General
