First-time setup of your device
First-time setup of your devic
e
First- time setu pGettingstarted
Please read the chapte r "Important notes", Page 13.
If your device is equipped with a Windows operating system, the necessary
hardware drivers and supplied software are already pre-installed.
Before you switch on the device for the first time, connect it to the mains voltage
using the main s ad apter, see "
Mains adapter connecting", Page 17.Themains
adapter must be conne cted during the entire installation process.
A system test is performed w hen your device is first switched on. Various messages
can appear. The display may remain dark for a short time or may flicker.
Please fo llow the instructions on the screen.
NEVER switch off your device during the first-time setup process.
On delivery, the battery can be found in the battery compartment or in the accessories kit.
The battery must be charged if you want to operate your device using the battery.
When used on the move, the built-in battery provides the device with the ne cessary power. You
can increase the operating time by using the available energy-sa ving functions.
For instructions on how to connect external devices (e.g. mouse, printer) to your
device, please refer to the operating manual for your device.
Unpacking and
checking the device
Should you d iscover any damage that occurred during transportation,
notify your local sales outlet immediately!
► Unpack all the individual parts.
PackagingTransport
► Check your
device for any visible damage which may have occurred during transportation.
You may ne
ed the packag ing in the future, if you need to transport your device.
16 Fujitsu Technology Solutions
To Next Page
Loading...
Need help?
General