Working with the notebook
Removing the card
Always remove the card according to the rules described below, to
ensure that none of your data is lost.
You can stop the card using the corresponding icon in the task bar:
► Left click on the icon to safely remove hard ware, located in the taskbar.
► Select the card you want to stop and remove.
► Press the "Enter" key.
Wait for th e dialog box which tells you that it is now safe to remove the card .
1
2
► If the eject button is lowere d, you must
first cause the eject button to release
from the notebook casing. To do this,
press the eject but ton until it pops out.
Press the eject button (1) so that the card
protrudes a little from the notebook.
► Pull the card out of the slot (2).
► Insert the c ard place hold er into the
slot guide.
► Carefully slide the placeholder for the
card as far as it will g o into th e slot.
Do not use e xcessive force.
Loudspeakers and microphones
Microph
one
Loudspe
akers
Basslou
dspeaker (subwoofer)
Volum ec
ontrol
Informat
ion on the exact position of the speakers and microphone can be found
in "
Port
s and operating elements", Page 9.
Please r
efer to chapter "
Key combin ations", Page 2 6 for information on setting the volume
and also
enabling/disabling the loudspeakers using key combinations.
If you a
ttach an external microphone, the built-in microphone is disabled.
When yo
u connect headphones or external speakers, the built-in speakers are disabled.
Infor
mation on connecting headphones and a microphone can be found
in "
Co
nnecting external devices", Page 64.
44 Fujitsu Technology Solutions
To Next Page
Loading...
Need help?
General