Fujitsu Oracle SPARC M12-2 User Manual

Table 5-12
Inactive/Hot Addition Procedure of a PCI Expansion Unit
Work
Order
Task Reference
1 Checking the operating condition of the
system
"9.2.1 Checking the Operation Status of
Physical Partitions and Logical Domains"
2 Powering off the physical partition
containing the SPARC M12-2S to which
to add a PCI expansion unit
"9.5.1 Stopping a Specific Physical
Partition"
3 Switching the mode switch on the OPNL
to Service
"2.3.2
OPNL Control Function"
4Removing the PCICS from the SPARC
M12-2S
"12.3.1 Enabling the Removal of a PCIe
Card"
5Removing the PCIe card filler from the
PCICS
"12.3.2 Removing a PCIe Card or PCIe
Card Filler"
6 Installing a link card in the PCICS to
install it in the SPARC M12-2S
"12.4.1
Installing a PCIe Card or PCIe
Card Filler"
7 Connecting a PCI expansion unit to the
link card
"5.2 Connecting Cables to the PCI
Expansion Unit" in the Fujitsu SPARC
M12-2S Installation Guide
8 Installing a PCIe card in the PCI
expansion unit.
"12.4.1 Installing a PCIe Card or PCIe
Card Filler"
9 Diagnosing the
SPARC M12-2S that has
undergone maintenance
"10.5.1 Diagnosing the SPARC M12
Hardware"
10 Confirming that there is no problem with
the added PCI expansion unit
"10.5.3 Checking the FRU Status After
Maintenance"
11 Switching the mode switch on the OPNL
to Locked
"2.3.2 OPNL Control Function"
12 Powering on the physical partition
containing
the SPARC M12-2S that
underwent maintenance
"10.9.1 Starting the System With an
XSCF Command"
13 Assigning the I/O resource to a logical
domain
"3.2 Operations and Commands Related
to Logical Domain Configurations" in the
Fujitsu SPARC M12 and Fujitsu
M10/SPARC M10 Domain Configuration
Guide
5.4 Inactive/Cold Addition Workflows
This section describes the workflows for inactive/cold addition of FRUs to the SPARC
M12-2S and inactive/cold addition of the SPARC M12-2S.
Before performing addition work, be sure to check the notes on maintenance work in
Chapter 5 FRU Addition Workflows 167

Fujitsu Oracle SPARC M12-2 Specifications

General

Brand	Fujitsu
Model	Oracle SPARC M12-2
Category	Server
Language	English