Fujitsu Oracle SPARC M12-2 User Manual

Table 3-13
Applicable Types of Maintenance in FRU Removal for the SPARC M12-2S (Multiple-BB
Configuration)
-: Not applicable
FRU Active Removal Inactive Removal System-Stopped Removal
Hot Cold Hot Cold Hot Cold
HDD/SSD OKOK OKOK OKOK
PCIe card OK OK OK OK OK OK
CMUU - OK - OK - OK
Memory - OK - OK - OK
PCI expansion unit
(chassis)
OK OK OK OK OK OK
SPARC M12-2S (*1) - OK (*2) - OK (*2) - OK (*2)
*1 The XSCF DUAL control cable, XSCF BB control cable, and crossbar cable need to be connected.
*2 Use the initbb command to remove a SPARC M12-2S when every connected SPARC M12-2S is in the hot state. After the SPARC
M12-2S initialized by the initbb command enters the cold state, remove it
from the system.
BB-ID#00
PPAR#00
PPAR#01
BB-ID#01
Oracle
Solaris
BB-ID#02
FRU
Removal of the FRU
Oracle Solaris
SPARC M12-2S SPARC M12-2S SPARC M12-2S
Running
Stopped
Cold
Hot
Building block configuration
3.4.3 Types of Maintenance for FRU Removal (SPARC
M12-2S in the Multiple-BB Configuration)
Table 3-13 lists the FRUs that can be removed from the SPARC M12-2S (multiple-BB
configuration) and the applicable types of maintenance in the removal of each FRU.
Active/Hot removal
Figure 3-41 shows the state of the system during active/hot removal in the SPARC
M12-2S (multiple-BB configuration).
Figu re 3-41
Active/Hot Removal in the SPARC M12-2S (Multiple-BB Configuration)
Active/Cold removal
Figure 3-42 and Figure 3-43 show the state of the system during active/cold removal
in the SPARC M12-2S (multiple-BB configuration).
Fujitsu SPARC M12-2/M12-2S Service Manual
･
January 202364

Fujitsu Oracle SPARC M12-2 Specifications

General

Brand	Fujitsu
Model	Oracle SPARC M12-2
Category	Server
Language	English