Fujitsu Oracle SPARC M12-2 User Manual

XSCF>
replacefru
------------------------------------------------------------------------------
Maintenance/Replacement Menu
Please select the chassis including replaced FRU.
No. FRU Status
--- ------------------- --------------
1 /BB#0 Degraded
2 /BB#1 Normal
3 /BB#2 Normal
4 /BB#3 Normal
------------------------------------------------------------------------------
Select [1-4|c:cancel] :
1
9.6.1 Releasing the SPARC M12-2S From the Building
Block Configuration
This section describes the procedure for releasing the SPARC M12-2S from the
system in a building block configuration.
For the procedure for incorporating the SPARC M12-2S with a replacement unit into
a building block configuration after releasing the SPARC M12-2S by using this
procedure, see "10.4.1 Incorporating the SPARC M12-2S Into
a Building Block
Configuration."
Confirm that the XSCF of the target SPARC M12-2S is in the standby state or is the
slave XSCF. If the XSCF of the SPARC M12-2S to be released is the master XSCF,
switch it to the standby state with the switchscf command. For details on
the
command, see the Fujitsu SPARC M12 and Fujitsu M10/SPARC M10 XSCF Reference
Manual of the XCP version used.
In this section, power off the SPARC M12-2S requiring maintenance by using the
replacefru command.
In the following example, maintenance is performed on an abnormal (Degraded)
BB#0 chassis with four SPARC M12-2S units
in a building block configuration.
Even in cases where the status of the SPARC M12-2S requiring maintenance is not
abnormal (Degraded), perform the same procedure.
1.
Log in to the XSCF shell.
2.
Execute the replacefru command to display the maintenance menu.
3.
With a number key, select the FRU requiring maintenance.
Enter "1"
since BB#0 is shown as "Degraded."
4.
With a number key, select the FRU requiring maintenance.
Enter "1" to release BB#0 for maintenance.
Chapter 9 Releasing FRUs From the System 311

Fujitsu Oracle SPARC M12-2 Specifications

General

Brand	Fujitsu
Model	Oracle SPARC M12-2
Category	Server
Language	English