Fujitsu Oracle SPARC M12-2 User Manual

Table 5-22
System-Stopped/Cold Addition Procedure of a PCIe Card (continued)
Work
Order
Task Reference
4Removing the PCICS from the SPARC
M12-2/M12-2S
"12.3.1 Enabling the Removal of a PCIe
Card"
5Removing the PCIe card filler from the
PCICS
"12.3.2 Removing a PCIe Card or PCIe
Card Filler"
6 Installing a PCIe card in the PCICS to
install it in the SPARC M12-2/M12-2S
"12.4.1 Installing a PCIe Card
or PCIe
Card Filler"
7 Connecting the power cords of all the
SPARC M12-2/M12-2S units
"10.1.1 Installing a Power Cord"
8 Diagnosing the SPARC M12-2/M12-2S
with the added PCIe card
"10.5.1 Diagnosing the SPARC M12
Hardware"
9 Confirming that there is no problem with
the added PCIe card
"10.5.3 Checking the FRU Status
After
Maintenance"
10 Switching the mode switch on the OPNL
to Locked
"2.3.2 OPNL Control Function"
11 Powering on all physical partitions "10.9.1 Starting the System With an
XSCF Command"
12 Assigning the I/O resource to a logical
domain
"3.2 Operations and Commands Related
to Logical Domain Configurations" in the
Fujitsu SPARC M12 and Fujitsu
M10/SPARC M10 Domain Configuration
Guide
5.6.2 System-Stopped/Cold Addition Workflow of the
HDD/SSD
Before adding the HDD/SSD, see "Precautions for HDD/SSD addition" in "7.2
Precautions for FRU Expansion."
Table 5-23 shows the workflow for system-stopped/cold addition of the HDD/SSD.
Chapter 5 FRU Addition Workflows 181

Fujitsu Oracle SPARC M12-2 Specifications

General

Brand	Fujitsu
Model	Oracle SPARC M12-2
Category	Server
Language	English