Fujitsu Oracle SPARC M12-2 User Manual

Table 6-3
Active/Hot Removal Procedure of a PCI Expansion Unit
Work
Order
Task Reference
1 Checking the operating condition of the
system
"9.2.1 Checking the Operation Status of
Physical Partitions and Logical Domains"
2 Checking the usage status of the PCIe
cards mounted in the PCI expansion unit
to be removed
"9.2.2 Checking the Assignment Status
of I/O Devices"
3 Releasing the I/O resources assigned to
the PCIe
cards mounted in the PCI
expansion unit to be removed
"9.3 Releasing I/O Resources From a
Logical Domain"
4 Confirming that you can release the PCI
expansion unit to be removed
"9.2.2 Checking the Assignment Status
of I/O Devices"
5 Releasing the link card connected to the
PCI expansion unit to be
removed, from
the system
"9.4 Enabling the Removal of Hardware"
6 Checking the operating condition of the
physical partition and logical domains (*1)
"9.2.1 Checking the Operation Status of
Physical Partitions and Logical Domains"
7Saving logical domain configuration
information
"9.1.1 Saving Logical Domain
Configuration Information"
8 Switching the mode switch on the OPNL
to Service
"2.3.2 OPNL Control Function"
9 Releasing the PCI expansion unit to be
removed and the link card
"11.3 Removing a Link
Cable" in the PCI
Expansion Unit for Fujitsu SPARC M12 and
Fujitsu M10/SPARC M10 Service Manual
10 Removing the PCICS in which the link
card is mounted from the SPARC M12-2/
M12-2S
"12.3.1 Enabling the Removal of a PCIe
Card"
11 Removing the link card from the PCICS "12.3.2 Removing a PCIe Card or
PCIe
Card Filler"
12 Installing a PCIe card filler in the PCICS
from which the link card was removed,
and installing the PCICS in the SPARC
M12-2/M12-2S
"12.4.1 Installing a PCIe Card or PCIe
Card Filler"
13 Switching the mode switch on the OPNL
to Locked
"2.3.2 OPNL Control Function"
*1 Reassign I/O resources to logical domains as required. For details, see "Chapter 3 Operations for Domain
Configuration" in the Fujitsu SPARC M12 and Fujitsu M10/SPARC M10 Domain Configuration Guide.
6.2 Active/Cold Removal Workflows
This section describes the workflows for active/cold removal of the FRUs mounted in
Fujitsu SPARC M12-2/M12-2S Service Manual
･
January 2023192

Fujitsu Oracle SPARC M12-2 Specifications

General

Brand	Fujitsu
Model	Oracle SPARC M12-2
Category	Server
Language	English