Fujitsu ScanSnap S300 User Manual

6.1 Using ScanSnap Manager
ScanSnap S300 Operator's Guide 137
Using the ScanSnap in Various Ways
6
■ Skipping blank pages
The ScanSnap is able to recognize blank pages and remove them from the output data. When
scanning documents in Duplex mode, both sides of the documents are scanned regardless if their
backsides are printed or not. Though the empty back sides are scanned, they are recognized as
[blank] and automatically removed, so they will not appear on the output data.
To change the setting, follow the procedure below.
Operation
1. Right-click the ScanSnap Manager icon on the taskbar, and then select [SCAN
Button Settings] from the menu.
2. Select the [Scanning] tab and click the [Option] button.
S
S

Fujitsu ScanSnap S300 Specifications

General

Film scanning	No
Color scanning	Yes
Input color depth	- bit
Maximum scan size	216 x 360 mm
Scanner type	Sheet-fed scanner
Sensor type	CIS
Minimum scan area (ADF)	50.8 x 50.8 mm
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5, B6
Maximum ISO A-series paper size	A4
Auto document feeder (ADF) input capacity	10 sheets
Bundled software	ScanSnap Manager V4.2, ScanSnap Organizer V3.2, CardMinder V3.2
Scan media weight	64 - 104.7 g/m²
Dimensions (WxDxH)	284 x 95 x 77 mm
Power requirements	AC 100V to 240V, 50 / 60 Hz
Dimensions (W x D x H) (imperial)	11.18 x 3.74 x 3.03 \
Maximum scan area (ADF) (imperial)	8.5 x 14.17 \
Minimum scan area (Auto Document Feeder)	2 x 2 \
Minimum RAM	512 MB
Minimum storage drive space	920 MB
Compatible operating systems	Windows 2000 Professional, Windows XP, Windows Vista
Power supply type	AC/USB
Power consumption (standby)	5 W
Power consumption (typical)	9 W
Sustainability certificates	ENERGY STAR
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	20 - 80 %
Certification	RoHS

Weight and Dimensions

Weight	1400 g