Fujitsu ScanSnap S300 User Manual

174
7.1 Clearing Document Jams
If a paper jam occurs during scanning, follow the procedure below to remove the jammed
document.
CAUTION
• Open the ADF before removing the jammed document.
• Be careful when removing the jammed document.
• When removing the jammed document, be careful not to get neckties or necklaces
entangled in the ScanSnap.
• The surface of the ADF glass becomes hot during operation. Take care not to get burned.
Operation
1. Remove the document on the paper chute.
2. Open the ADF while pulling the cover open lever.
HINT
Clean the ADF by following the guidelines in "8.2 Cleaning the Inside of the
Scanner" (on page 185).
Paper chute
Cover open lever
ADF

Fujitsu ScanSnap S300 Specifications

General

Film scanning	No
Color scanning	Yes
Input color depth	- bit
Maximum scan size	216 x 360 mm
Scanner type	Sheet-fed scanner
Sensor type	CIS
Minimum scan area (ADF)	50.8 x 50.8 mm
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5, B6
Maximum ISO A-series paper size	A4
Auto document feeder (ADF) input capacity	10 sheets
Bundled software	ScanSnap Manager V4.2, ScanSnap Organizer V3.2, CardMinder V3.2
Scan media weight	64 - 104.7 g/m²
Dimensions (WxDxH)	284 x 95 x 77 mm
Power requirements	AC 100V to 240V, 50 / 60 Hz
Dimensions (W x D x H) (imperial)	11.18 x 3.74 x 3.03 \
Maximum scan area (ADF) (imperial)	8.5 x 14.17 \
Minimum scan area (Auto Document Feeder)	2 x 2 \
Minimum RAM	512 MB
Minimum storage drive space	920 MB
Compatible operating systems	Windows 2000 Professional, Windows XP, Windows Vista
Power supply type	AC/USB
Power consumption (standby)	5 W
Power consumption (typical)	9 W
Sustainability certificates	ENERGY STAR
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	20 - 80 %
Certification	RoHS

Weight and Dimensions

Weight	1400 g