Fujitsu ScanSnap S300 User Manual

2.2 Connecting the ScanSnap to your PC
ScanSnap S300 Operator's Guide 15
Connecting the ScanSnap
2
2.2 Connecting the ScanSnap to your PC
When the installation of the above programs is complete, connect the ScanSnap to your computer.
■ Connecting the Cable
Connect the ScanSnap to a power supply in either of two ways below:
First, connect to a power supply, and then connect to a personal computer with the USB cable.
ATTENTION
Be sure to install the supplied programs, and then restart your computer before
connecting the ScanSnap to your computer with cables. (For details about the
installation, refer to "Installing the Supplied Programs" on page 6).
Power source Use the following cable: See:
Power outlet
(When always operating
the scanner at the same
regular place where it
can be fed power from a
power outlet)
"When connecting with the
Power cable:" (page 16)
Personal computer
(When using the
scanner at a place
where it reaches no
power outlet, or when
carrying the scanner
together with your laptop
computer around and
operating at a place
where no power outlet is
available)
"When connecting with the
USB bus power cable:" (page
17)
CAUTION
Use only the AC cable and AC adapter (power cable) below:
Otherwise, a failure may be caused.
• Manufacturer: LEI
• Model No.: NU13-1072166-I3
The Power cable
is a combination of
the AC adapter
and AC cable.
Power cable
USB bus power
cable

Fujitsu ScanSnap S300 Specifications

General

Film scanning	No
Color scanning	Yes
Input color depth	- bit
Maximum scan size	216 x 360 mm
Scanner type	Sheet-fed scanner
Sensor type	CIS
Minimum scan area (ADF)	50.8 x 50.8 mm
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5, B6
Maximum ISO A-series paper size	A4
Auto document feeder (ADF) input capacity	10 sheets
Bundled software	ScanSnap Manager V4.2, ScanSnap Organizer V3.2, CardMinder V3.2
Scan media weight	64 - 104.7 g/m²
Dimensions (WxDxH)	284 x 95 x 77 mm
Power requirements	AC 100V to 240V, 50 / 60 Hz
Dimensions (W x D x H) (imperial)	11.18 x 3.74 x 3.03 \
Maximum scan area (ADF) (imperial)	8.5 x 14.17 \
Minimum scan area (Auto Document Feeder)	2 x 2 \
Minimum RAM	512 MB
Minimum storage drive space	920 MB
Compatible operating systems	Windows 2000 Professional, Windows XP, Windows Vista
Power supply type	AC/USB
Power consumption (standby)	5 W
Power consumption (typical)	9 W
Sustainability certificates	ENERGY STAR
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	20 - 80 %
Certification	RoHS

Weight and Dimensions

Weight	1400 g