3.1 Flow of Operations
ScanSnap S300 Operator's Guide 27
Using the ScanSnap
3
■ Scanning documents in Quick Menu Mode
Operation
1. Check for the ScanSnap Manager icon on the taskbar as shown below.
Check that [Use Quick Menu] is marked
in the menu that pops up when the ScanSnap
Manager icon is right-clicked.
Operation
2. Load the document onto the ScanSnap.
HINT
If the ScanSnap Manager icon is not displayed on the taskbar, from the
[Start] menu, select [All Programs]
D [ScanSnap Manager] D [ScanSnap
Manager] to start up ScanSnap Manager.
Generally, ScanSnap Manager is registered under Startup programs, so that its
icon is displayed on the taskbar when Windows starts. If it is not registered
under Startup programs, from [Start] menu, select [All Programs]
D [ScanSnap
Manager]
D [Startup Register] to register it.
HINT
If [Use Quick Menu] is not marked, scanning is performed in Left-Click Menu
Mode. For how to scan the document in the Left-Click Menu Mode, refer to
"Scanning documents in Left-Click Menu Mode" on page 32.
Refer to "3.2 Paper Sizes of Documents to be Scanned" (page 38) and "3.3
Loading Documents" (page 40) for more information.
S
S
S
S