ScanSnap S300 Operator's Guide xvii
Do not use the scanner while driving a car.
Do not expose the scanner to excessive heat.
Before moving the scanner, unplug the power cord from the
power outlet.
Avoid any contact when scanner is working.
Do not use the scanner while driving a car for safety. Accidents can happen.
Do not leave the scanner in the direct sunlight, at high temperature such as in a
car in the scorching sun, or near heating apparatus. Doing so might cause
excessive heat to build up inside the scanner, causing heating, deforming, or
melting of the scanner parts (e.g., cover), and raising the temperature inside the
scanner, which could result in fire or scanner trouble. Install the scanner in a well-
ventilated location.
Do not move the scanner with the power and interface cables connected as this
might damage the cables, causing fire, electric shock or injuries.
Before moving the scanner, be sure to disconnect the power plug from the power
outlet, and disconnect interface cables as well. Also, make sure that the floor is
free of obstructions.
Avoid getting a sleeve, necktie, or hair caught up in any scanner mechanism
when scanning as this may cause injuries.