Furuno FELCOM 500 Operator's Manual

1. BASIC OPERATION
1-10
1.5.3 How to edit text
Edit text at the text input screen.
How to correct text
1. At the text input screen, put the cursor at the beginning of the text to correct.
2. Press the CLR key. One character erases.
Note: To erase all characters to the right of the cursor, press and hold the CLR
key down.
3. Input the correct character(s).
How to copy or cut text
Copy (or cut) indicated text and paste into another message.
1. At the input screen, press the key to open the sub menu.
2. Press 1 (to Copy), or 2 (to Cut).
3. Place the cursor at the beginning of the text to copy or cut, and press the Enter
key.
4. Press X to move the cursor and highlight the desired text to copy or cut (maximum
192 characters).
Note: Press the CLR key to reselect the text to copy or cut.
5. Press the Enter key. The text is copied to the clipboard (max.10 text items). If you
copy an 11th text item, the oldest text item is erased.
Highlighted text

Furuno FELCOM 500 Specifications

General

Brand	Furuno
Model	FELCOM 500
Category	Marine GPS System
Language	English