2. HANDSET OPERATIONS
2-10
Note 2: To register a number entered from the idle screen to the Contacts, press the
key, then 2 to select [Save num.]. The remainder of the procedure is the same
as that from step 5 in this procedure.
2.2.3 How to search the Contacts list
This section shows you how to search the handset, communication unit and SIM card
for registered contact.
1. Press the key to open Contacts.
2. Press the key to open the submenu.
3. Press 3 to select [Search].
4. Select the [Name] field to search by name, or the [No.] field to search by number.
Press the Enter key.
5. Enter part of name (or telephone number) then press the Enter key.
6. Press the key to perform the search. The results of the search appear on the
Result screen. If the contact can not be found, the message "Not found" displays.
Note: To display all the contact data, press the key at step 5 with nothing
entered in the fields.
7. Do one of the following depending on your objective:
• Place a telephone call: Press the key.
• Edit contact: Press the key to show the submenu. Press 2 key to select
[Edit]. Start from step 5 at paragraph 2.2.4.
• Delete contact: Press the key to show the submenu. Press 3 key to select
[Delete]. Press S to select [Yes] then press the Enter key.
To Next Page
Loading...
Need help?
General
