Furuno FELCOM 500 Operator's Manual

3. SETTINGS FOR HANDSET
3-2
How to set the ring pattern
1. In the [Sound] menu, press either the 1, 2, 3, or 4 key for the following:
1: External phone incoming notification pattern
2: Internal phone incoming notification pattern
3: SMS message notification pattern
4: System message notification pattern
2. Press 2 to select [Pattern] to show the pattern selection
screen.
3. Press S or T to select the pattern.
Note: Press the key to play the pattern at the select-
ed pattern. Press S or T to adjust the volume, from 1 - 7
and off.Press the key to stop.
4. Press the Enter key.
5. Press the key to close the menu.
3.1.2 How to adjust keypad tones volume
To adjust the volume for the keypad tones, do the following:
1. In the [Sound] menu, press 5 to select [Keypad tones].
2. Press S or T to select the volume level.
3. Press the Enter key.
4. Press the key to close the menu.
3.1.3 How to adjust the volume for the microphone
1. Press 6 to select [MIC volume] from the [Sound] menu
to show the MIC volume setting window.
2. Press S to increase the volume, or T to decrease the
volume (setting range: 1 to 7).
3. Press the Enter key.
4. Press the key to close the menu.

Furuno FELCOM 500 Specifications

General

Brand	Furuno
Model	FELCOM 500
Category	Marine GPS System
Language	English