Garmin Forerunner 610 User Manual

Forerunner 610 Owner’s Manual 23
ANT+ Sensors

Cadence data from the GSC 10 is
always recorded. If there is no GSC 10
paired, GPS data is used to calculate
the speed and distance. Cadence is
your rate of pedaling or “spinning”
measured by the number of revolutions
of the crank arm per minute (rpm).
There are two sensors on the GSC 10:
one for cadence and one for speed.

Before you customize the bike sensor
options, you must change your sport to
cycling (page 17).
Before you can calibrate the bike
sensor, it must be properly installed
and actively recording data.
Calibrating your bike sensor is optional
and can improve accuracy. For
calibration instructions specic to your
bike sensor, refer to the manufacturer’s
instructions.
1. Select
> Setup > Bike Sensor
> Calibration.
2. Select an option:
• To use GPS to determine your
wheel size, select Auto.
• To enter your wheel size, select
Manual.

• Cadence alerts (page 9)
• Bike training (page 17)
• Cadence data elds (page 35)

If you have an ANT+ compatible
weight scale, the Forerunner can read
the data from the weight scale.
1. Select LIGHT.
A message appears when the weight
scale is found.
2. Stand on the scale.

Garmin Forerunner 610 Specifications

General

Time/distance alert	Yes
Barometric altimeter	No
Lap history	1000
Number of waypoints	100
Product color	Black
Market positioning	Sport watch
Protection features	Water resistant
Battery life	8 h
Battery life (power save mode)	672 h
Display resolution	128 x 128 pixels

Weight and Dimensions

Weight	72 g