Initial setup
9
flash
aA
redial
Handset layout
Left Softkey
Press to select the function
displayed on the handset
screen directly above it.
Right Softkey
Press to select the function
displayed on the handset
screen directly above it.
flash
Talk/Flash
Press to make and receive
calls.
During a call, press to
answer a second incoming
call if you receive a call
waiting alert (available only
if you have subscribed to
the call waiting feature
from your telephone
Speakerphone
Press to make or
answer a call using the
speakerphone.
Mute
Press to mute the
microphone. Press again to
resume conversation.
aA
*/aA
Press to input “*” when in
editing mode.
Press to switch between
lowercase, uppercase,
and numeric input when
entering text and numbers
End
Press to end a call.
During an operation, press
to cancel and exit without
making changes.
Skype
Press to access the Skype
status menu.
during menu operation.
#/Pause
Press to input “#” when in
editing mode.
If you need a pause between
digits, press and hold this
key until a P appears in
the display. This inserts a
3-second pause in the dialing
sequence.
Left/Intercom
While in menu, press to
scroll left.
Press to initiate an intercom
call or transfer a call.
redial
Right/Redial
While in menu, press to scroll
right.
Press to review previously
dialed numbers.
Up/Calls
Press to review the call
log when the telephone
is not in use.
While in menu, press to
scroll up.
During a call, press to increase
the volume.
Down/Contact List
Press to review the contact list
when the telephone is not in use.
While in menu, press to
scroll down.
During a call, press to decrease
the volume.
Ringer/Voice Mail
Waiting Indicator LED
Flashes during incoming
landline call.
Flashes to indicate new voice
mail message has been
received.