GE Kilsen KFP-CF4 User Manual

Appendix A: Configuration presets
64 Kilsen KFP-CF Series Installation Manual
NBN S21-100
Configuration presets for NBN S21-100 are as follows.
Four- and eight-zone control panels
Code Zone EOL Warning sounder
outputs
Evacuation sounder
outputs
Zone type
21 Passive 2 2 Automatic
22 Passive, CleanMe
enabled
2 2 Automatic
Note: Alarm relay follows evacuation sounders. CleanMe is not currently available for Kilsen detectors.
Additional configuration characteristics are shown below.
Default sounder delay 1 minute
Default zone delay 0n
Start/Restart sounders Start sounders or restart stopped sounders at access level 2 with or
without a fire alarm event
Inputs and outputs are as follows.
INPUT1 Remote reset
INPUT2 Delays off
OUT1 Evacuation sounders
OUT2 Evacuation sounders
OUT3 Warning sounders
OUT4 Warning sounders

GE Kilsen KFP-CF4 Specifications

General

Brand	GE
Model	Kilsen KFP-CF4
Category	Control Panel
Language	English