NX-10 User Manual 14
Resetting fire detectors
2. The alarm memory displays the zone(s) where the fire alarm has
occurred.
3. Press the
keys to scroll through the different zones listed in the
alarm memory. Press OK to leave the alarm memory.
4. Press OK at the default display.
5. Navigate with the keys to Detector Reset and press OK.
6. The fire detectors are reset, the fire alarm icon disappears and your
system is ready to be armed.
1. Enter your user code to turn off the alarm. The siren stops ringing and
the keypad stops beeping. The fire alarm icon is still displayed.
A fire alarm can occur when your system is armed or disarmed. A fire alarm sounds a pulsed siren and causes the keypad to beep rapidly.
The fire alarm icon is displayed. To turn off a fire alarm, enter your user code. You must also reset the fire detectors after a fire alarm. You
follow the same steps regardless of whether the fire alarm is automatically or manually activated.
6 Alarm Memory
Zone 6
OK
OK
Quick User Menu
Detector Reset
System Ready
Type Code to Arm
........
........
........
........
........
........
To Next Page
Loading...
Need help?
General
