NX-10 User Manual 27
Activating your light control system
2. Press the relevant number to add the device to the set of selected
devices. In this case, device 2 and 5 are selected.
3. Press
or to switch all selected devices on or off. The devices are
turned on or off depending on their current state.
1. A list of all the configured devices in your system is displayed. Each
device has a unique code.
The light control system allows you to turn on devices in your house from your keypad. To do this, press OK, and then press the key, to
enter the Quick User Menu. Navigate with the
keys to Light Control and press OK.
Devices On
---------- Off
Devices On
-2--5----- Off
........
........
........
To Next Page
Loading...
Need help?
General
