NX-10 User Manual 23
Adjusting the LCD display
2. Scroll to LCD Contrast and press OK. The current LCD contrast is shown
as a horizontal bar chart.
3. Press F4 (
) to decrease the contrast, or F5 ( ) to increase it, and
press OK.
4. Scroll to LCD Brightness and press OK. The current backlight brightness
is shown as a horizontal bar chart.
5. Press F4 ( ) to decrease the brightness, or F5 ( ) to increase it, and
press OK.
6. Scroll to Backlight Always On and press OK.
7. Navigate with the
keys to Enabled or Disabled and press OK to
turned the backlight on or off.
1. Press OK and enter a user code.
You can change the contrast of the LCD display and the brightness of the backlighting. The LCD contrast has 10 levels. Both the LCD
brightness and keypad volume have 16 levels.
LCD Contrast
------
----
/
OK
LCD Brightness
---
-------------
OK
User Menu
Backlight Alwa>
/
OK
........
........
........
........
........
........
........
OK
To Next Page
Loading...
Need help?
General
