NX-10 User Manual 7
Arm Away
Press to arm the system in Away mode.
Arm Stay
Press to arm the system in Stay mode. When in the menu, press
to scroll to the start of the LCD message. If configured this way by the
installer you can use this key to toggle the Stay/Instant mode of the
armed partition.
Disarm
Press to disarm the selected partition. This key works in Master
mode only. When in the menu, press to scroll to the end of the LCD
message.
Bypass Zone
Press to select (or deselect) a zone to bypass.
Night Mode
Press to arm the system in Night mode.
Chime
Press to toggle Chime mode on and off.
F1, F2, F8
These keys can be programmed by the installer to perform certain
functions.
Press the navigation keys to scroll through menu lists and options.
When in master mode or not in a menu:
•Press to display bypassed zones.
•Press to display problem zones.
When editing text and phone numbers:
•Press
to overwrite or insert text.
•Press
to delete text.
NO
•Press NO to cancel a change to the menu selection or
• navigate to a higher level in the menu structure or
• cancel a sequence when entering numeric data.
Note
: It is recommended to always use the
NO
key to wake up a keypad.
OK
*
•Press OK to activate the menu or
• accept selection changes or
• move forward in the menu structure or
• complete a sequence when entering numeric data.
#
When editing text and phone numbers:
•Press # F4 (or ) to move to the first character or number.
•Press # F5 (or ) to move to the last character or number.
•Press #
to delete from the current position to the end.
Keypad keys
To Next Page
Loading...
Need help?
General
