GE NX-10 User Manual

NX-10 User Manual 8
Power If power is present, the left icon is
displayed. If power is failing, the right
icon shows up.
Bypass In MASTER mode, the left icon shows
up if ANY partition is bypassed. In
PARTITION mode, the right icon is
being displayed if ANY zone is
bypassed.
Full/Part
armed
In MASTER mode, the FULL icon (left)
shows up only if ALL partitions are
ARMED, while the PART icon (right)
shows up if NOT ALL partitions are
ARMED.
Stay/Night
mode
In PARTITION mode, the STAY icon
(left) shows up if armed and staying,
and the NIGHT icon (right) if the night
function is enabled.
Away In PARTITION mode, one of these
icons shows up if armed and leaving,
the left one if ANY zone is bypassed,
the right one if NO zone is bypassed.
Chime In CHIME mode, this icon will be ON,
otherwise OFF.
Fire This icon indicates that a fire zone or
the fire keypad function has been
activated.
This icon indicates RF-link field
strength.
Battery
Low
If the keypad battery is low, this icon
is flashing ON and OFF.
Alarm This icon flashes ON and OFF in case
of an alarm condition.
Trouble This icon indicates a system trouble
condition, for example, day zone
trouble or AC power loss.
Service This icon is ON in case the system
needs to be serviced. You can display
a service message with the # key.
Ready to
arm
If the system is OK to arm, the V-sign
icon is displayed. If it is NOT OK to
arm, the V-sign disappears. In case
the force armable zone is open, it will
flash on and off.
LCD icons

GE NX-10 Specifications

General

Brand	GE
Model	NX-10
Category	Security System
Language	English