4-6 Patient Data Module 2030047-001A
Service Tool and Configuration
432A
5. To disable the Security Accounts Manager, select Disable from the Startup type
drop down list.
6. Select Apply to disable the Security Accounts Manager.
7. Select Ok and close all windows.
8. Repeat these steps for all VPN, wireless network cards or any firewall protection
programs running on your PC.
NOTE
If you are unsure of the firewall and networking services on your PC, contact
your local IT administrator for details. Windows 2000 and XP PC’s allow
you to send a list of services to your IT administrator.
Enter the Patient Data Module service tool
1. Properly connect and configure the Patient Data Module and service laptop as
described in Set up the PC on page 4-2.
2. Insert the Patient Data Module software CD in the CD-ROM drive. The GEHC
MS Tool application opens automatically.
If the GEHC MS Tool application does not launch, open the CD-ROM drive and
double-click ShellExecute.js.
3. Type the username and password and click login or press Enter on the keyboard.
Username: biomed
Password: ChangeMe
Verify
Stopped
To Next Page
Loading...
Need help?
General
