General Procedures and Functional Checks
4-10 Vivid T9/Vivid T8 – Basic Service Manual
5795591-100 English Rev. 3
4-2-5 Logging on to Vivid T9/Vivid T8 as “ADM”
Select Utility tab on the touch screen, then select Config.
It will bring up the Operator Login dialog where you must log
on.
Figure 4-2. Operator Login Window
1. Operator: Select the operator.
2. Password: Enter Operator’s password (optional).
3. Select the type of Login or Cancel.
• Emergency: Stores data only from current patient
examination.
• OK: Standard login.
• Cancel: Cancel login.
As default, two users are defined, USR and ADM.
• USR
If you log on as USR, you will have access to do set-up tasks
that a user may need to do during daily use.
As default, no password has been set for USR. Just type the
name USR, and select Login.
• ADM
If you log on as ADM, you will have access to do general set-up,
service adjustments, adjust network and connectivity settings.
As default, the password for ADM is ulsadm .
Select the name ADM, the password (ulsadm) and select
Login.
It is possible for the administrator (ADM) to establish new users
and set unique passwords for each user, including a new
password for ADM. If the login as ADM fails, contact the
responsible person in the hospital to get access.
To Next Page
Loading...
Need help?
General
