Functional checks
Vivid T9/Vivid T8 – Basic Service Manual 4-35
5795591-100 English Rev. 3
4-3-30 Back End Processor checks
• If all the previous tests have been passed successfully, the
Back End Processor is most likely OK.
If the system seems to be operating erratically, please refer
to ‘Diagnostics/Troubleshooting’ on page 7-1.
4-3-31 Operator Panel Test
• The Operator Panel is tested when the is powered up as
part of the start-up scripts, run at every start-up.
For more info, please refer to ‘Diagnostics/Troubleshooting’
on page 7-1.
4-3-32 Peripheral checks
4-3-32-1 Printer checks
The internal printer is controlled from the P1 and P2 keys on the
Vivid T9/Vivid T8 ’s Operator Panel.
The factory default is:
• P1 for the UP-D711MD printer
P2 for the whole screen secondary capture to clipboard
4-3-33 Turn OFF Power to Vivid T9/Vivid T8
See 4-2-3 ‘Power off’ on page 4-8 for more information.
4-3-34 Mechanical Functions Checks
4-3-34-1 Operator Panel Movement
Please refer to:
• 4-2-4 ‘LCD Monitor position adjustment’ on page 4-9
To Next Page
Loading...
Need help?
General
