56 ADL500 • Quick installation guide - Specifications and connection
8.2.8.1 Language selection
Menu CONFIG DRIVE, parameter 04.19 Language select, PAR: 578, default=English.
This is used to set one of the languages available: English, Italian, French, German, Spanish and Turkish.
To set a language other than English or Italian (pre-installed on the drive) contact the technical service centre.
04.01
DRIVE MONITOR
04.02
DRIVE INFO
04.03
DRIVE CONFIG
04.04
ALARM CONFIG
x5
12 /18
PAR: 578
Language select
English
Value: 0
12 /18
PAR: 578
Language select
English
Value: 0
12 /18
PAR: 578
Language select
Italian
Value: 1
Press EESC to cancel.
8.2.8.2 Access level selection
Menu CONFIG DRIVE, parameter 04.03 Access mode, PAR: 554.
Readonly a read-only level, where a limited number of parameters are displayed.
Easy
control and without tuning.
Intermediate (default) this level allows the parameters to be displayed and changed for complete commission-
ing and basic optimisation.
Expert this level is for displaying and changing parameters for advanced optimisation.
Service Reserved for Gefran Service.
04.01
DRIVE MONITOR
04.02
DRIVE INFO
04.03
DRIVE CONFIG
04.04
ALARM CONFIG
x3
04 /18
PAR: 554
Access level
Intermediate
Value: 2
04 /18
PAR: 554
Access level
Intermediate
Value: 2
04 /18
PAR: 554
Access level
Easy
Value: 1
8.2.9 Startup display
Menu CONFIG DRIVE, parameter Startup display, PAR: 574.
This is used to set the parameter that will be displayed automatically at drive power-on.
Entering the value -1 (default), the function is disabled and the main menu is displayed at power-on.
8.2.10 Back-lighting of the display
Menu CONFIG DRIVE, parameter Display backlight, PAR: 576. Sets lighting of the display:
On the light of the display always stays on.
To Next Page
Loading...
Need help?
General