Gendex Orthoralix 8500 DDE User Manual

7-1032-0253-EN Rev 3
Chapter
7
Standard Pan Projection
Refer to Appendix B, Technique Factors, for the factory settings for this
projection. For the X-ray projection geometry, refer to Appendix C, X-ray
Projection Geometries.
The procedure to do a Standard Pan projection starts with preparing the
Orthoralix 8500 DDE:
• Select the standard Pan projection
Next the patient is prepared:
• Properly position the patient in the Orthoralix 8500 DDE
• Adjust the patient’s head position
The exposure is made.
NOTE: A quick reference guide indicating the options/actions necessary to
perform a standard panoramic exposure is located on the right side of
the column near the control panel.
Prepare the Orthoralix 8500 DDE
1. Press the Function button until the Standart Pan is selected.

Gendex Orthoralix 8500 DDE Specifications

General

Brand	Gendex
Model	Orthoralix 8500 DDE
Category	Dental equipment
Language	English