EasyManuals Logo
Home>Hardi>Farm Equipment>Commander Plus SPC Series

Hardi Commander Plus SPC Series User Manual

Hardi Commander Plus SPC Series
94 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #37 background imageLoading...
Page #37 background image
37
GB 08 04
Operation
5. Depending on the chemical in question, the Pressure
Manifold can be set on Agitation. If no agitation is
needed, this valve must be closed.
6. Engage the P.T.O. and start the pump.
WARNING! Do not leave the sprayer whilst
refilling the tank, and keep an eye on the level
gauge in order NOT to overfill the tank!
FF
FF
F
illing ofilling of
illing ofilling of
illing of
rinsing tank (if rinsing tank (if
rinsing tank (if rinsing tank (if
rinsing tank (if
f f
f f
f
itted)itted)
itted)itted)
itted)
The rinsing tank is situated under the main tank. Only fill
this tank with clean water.
The rinsing tank is filled through the inlet, situated
beneath the Suction Manifold valves. Water can be
filled directly through the inlet - or through a socket piece
A (optional equipment) connected to a water hose.
Rinsing tank capacity
A water level indicator (limpid hose with floating ball) is
situated beneath the platform.
4. Filling device and Fast filling device
used simultaneously
The Filling Device and the Fast Filling Device can be
used simultaneously - this gives even bigger filling
capacity.
WARNING: Do not leave the sprayer whilst
refilling the tank, and keep an eye on the level
gauge in order NOT to overfill the tank!
NOTE! Observe local legislation regarding use of Filling
Device. In some areas it is prohibited to fill from open
water reservoirs (lakes, rivers etc.). It is recommended
only to fill from closed reservoirs (mobile water tanks
etc.) to avoid contamination.
WARNING! If suction hose/filter is carried on the
sprayer during spraying, it can be contaminated
by spray drift, which will be transferred to lake/
river when filling!
5. Quick coupler for external filling
The quick coupler is operated as follows
1. Fit the external water hose to the quick coupler on the
trailer.
2. Close self-cleaning filter.
3. Turn handle on Pressure Manifold towards Main tank.
4. Turn handle on Suction Manifold towards Filling
device.
ledoM ertiL .laG.pmI .laGSU
0082/00220627507
0024/0023064101021
028
Black
Green
Green
Green
T020-0004
T060-0112
T060-0115
T060-0116
AA
AA
A

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Hardi Commander Plus SPC Series and is the answer not in the manual?

Hardi Commander Plus SPC Series Specifications

General IconGeneral
BrandHardi
ModelCommander Plus SPC Series
CategoryFarm Equipment
LanguageEnglish

Related product manuals