8
GB 04 04 04
Description
SprSpr
SprSpr
Spr
aa
aa
a
yy
yy
y
er useer use
er useer use
er use
The HARDI COMMANDER sprayer is for the application
of crop protection chemicals and liquid fertilisers.
The equipment must only be used for this purpose. It is
not allowable to use the sprayer for other purposes.
If no local law demands that the operator must be
certified to use the spray equipment, it is strongly recom-
mended to be trained in correct plant protection and in
safe handling of plant protection chemicals to avoid
unnecessary risk for persons and the environment when
doing the spray job.
Unloading the sprUnloading the spr
Unloading the sprUnloading the spr
Unloading the spr
aa
aa
a
yy
yy
y
er frer fr
er frer fr
er fr
om the trom the tr
om the trom the tr
om the tr
ucuc
ucuc
uc
kk
kk
k
For the unloading of the sprayer a crane or a fork lift is
needed. When loading with a crane please observe the
lifting points as shown on the illustration, and make sure
that the straps or belts used for lifting are strong enough.
T159-0006
BefBef
BefBef
Bef
oror
oror
or
e putting the spre putting the spr
e putting the spre putting the spr
e putting the spr
aa
aa
a
yy
yy
y
er intoer into
er intoer into
er into
operoper
operoper
oper
aa
aa
a
tiontion
tiontion
tion
Although the sprayer has been applied with a strong and
protective surface treatment on steel parts, bolts etc. in
the factories, it is recommended to apply a film of
anticorrosion oil (e.g. CASTROL RUSTILLO or SHELL
ENSIS FLUID) on all metal parts in order to avoid
chemicals and fertilisers discolouring the enamel.
If this is done before the sprayer is put into operation for
the first time, it will always be easy to clean the sprayer
and keep the enamel shiny for many years.
This treatment should be carried out every time the
protection film is washed off.
To Next Page
Loading...
Need help?
General
