EasyManuals Logo
Home>Hardi>Farm Equipment>Commander Plus SPC Series

Hardi Commander Plus SPC Series User Manual

Hardi Commander Plus SPC Series
94 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #43 background imageLoading...
Page #43 background image
43
GB 08 04
Operation
with clean water.
5. Disengage pump again.
6. Open Self-cleaning filter again.
WARNING! The rinsing nozzles cannot always
guarantee a 100% cleaning of the tank. Always
clean manually with a brush afterwards, espe-
cially if crops sensitive to the chemical just sprayed are
going to be sprayed afterwards!
TT
TT
T
ecec
ecec
ec
hnical Rhnical R
hnical Rhnical R
hnical R
esidueesidue
esidueesidue
esidue
Inevitably a quantity of spray liquid will remain in the
system. It cannot be sprayed properly on the crop, as
the pump takes in air when the tank is about to be
empty.
This Technical Residue is defined as the remaining liquid
qty. in the system as the first clear pressure drop on the
pressure gauge is read.
1) Residue in main tank, possible to dilute with water from rinsing
tank
2) Total residue in tank and spraying circuit on standard sprayer.
Variations due to different ground inclinations etc.
The dilutable residue must be diluted 10 times with clean
water and sprayed to the crop just sprayed before
cleaning the sprayer - See paragraph Cleaning.
ertil,eudiseR
0082/00220024/00230082/00220024/0023
elbatuliD
eudiser
1
----
latoT
eudiser
2
----
024
DrDr
DrDr
Dr
aining a raining a r
aining a raining a r
aining a r
esidueesidue
esidueesidue
esidue
Using the drUsing the dr
Using the drUsing the dr
Using the dr
ain vain v
ain vain v
ain v
alvalv
alvalv
alv
ee
ee
e
If draining a residue, e.g. liquid
fertilisers into a reservoir, a snap
coupler with hose can rapidly be
connected to the drain valve, and the
liquid can be let safely out.
Using the suction quicUsing the suction quic
Using the suction quicUsing the suction quic
Using the suction quic
k couplerk coupler
k couplerk coupler
k coupler
1. Connect the hose to the suction quick coupler on the
trailer (pressure).
2. Turn the green valve towards External tank.
3. Turn the black valve towards Suction from main tank
and close Self-cleaning filter (yellow valve).
4. Engage the P.T.O to start the pump.
OperOper
OperOper
Oper
aa
aa
a
tion oftion of
tion oftion of
tion of
the dr the dr
the dr the dr
the dr
ain vain v
ain vain v
ain v
alvalv
alvalv
alv
eses
eses
es
Main tankMain tank
Main tankMain tank
Main tank
Pull the string at left hand side of the tank to open the
drain valve. The valve is spring-loaded but can be kept
open by pulling the string out and upwards in the V-
shaped slit.
To release and close the drain valve again pull the string
downwards and the valve will close automatically.
T020-0021
T020-0022
T020-0023
T060-0112

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Hardi Commander Plus SPC Series and is the answer not in the manual?

Hardi Commander Plus SPC Series Specifications

General IconGeneral
BrandHardi
ModelCommander Plus SPC Series
CategoryFarm Equipment
LanguageEnglish

Related product manuals