2G40, 2G40 H Technical data
HATZ
21Operator’s Manual
4.2 Engine type plate
VARIABLE SPEED. ULTRA LOW SULFUR FUEL ONLY.
Power Category:
EMISSION CONTROL SYSTEM INFORM.:
The layout of the EPA/CARB type plate depends on the engine application
and is affixed to the air guide housing.
It contains the following information:
1 EPA/CARB engine family number
2 Engine type, customer specification and setting of pumping start (°
crankshaft before top dead center)
3 Engine serial number
4 Max. engine speed (rpm)
5 Model year
6 Displacement (liters) and inspection requirement for special settings
7 Injection pump effective stroke (mm) and engine capacity
8 Information on exhaust control system
9 “variable speed" or "constant speed only" (if necessary)
The type plate also defines the applicable emissions-related performance
class of the engine.
The figure shows an EPA/CARB type plate.
A text that refers to the exhaust legislation and corresponds to the engine
type is printed on the type plate (EPA or EPA and CARB).
Every engine is equipped with an additional unattached type plate. When the
engine is built into a machine and the original type plate is not readily visible,
the second unattached type plate must be affixed to the application in a posi-
tion that is clearly visible for an average person.
The following data must always be specified in case of queries and for spare
parts orders:
To Next Page
Loading...
Need help?
General
