Hatz 2G40 - 7.5 Switching off the engine; 7.5.1 Switching off the engine (mechanical)

Operation and use 2G40, 2G40 H
40
HATZ
Operator’s Manual
7.5 Switching off the engine
Safety notes
CAUTION
Danger of injury from unauthorized access.
There is a danger of injury if unauthorized persons handle the
machine.
▪ Protect the starting key against unauthorized access during
breaks in operation or after completing work.
CAUTION
Protect the ignition lock against dirt and moisture.
▪ With the starting key pulled out, seal the ignition lock with
the protective cap.
Methods of switching off the engine
The engine can be switched off in different ways depending on how it is
equipped:
▪ Speed control lever (mechanical)
▪ Stop lever (mechanical)
▪ Starting key (electrical)
7.5.1 Switching off the engine (mechanical)
NOTICE
i
Engines with a blocked lower idle speed cannot be switched off
with the speed control lever. In this case, the engine is switched
off with the stop lever or starting key, depending on how the en-
gine is equipped.