EasyManuals Logo

Hatz 2G40 User Manual

Hatz 2G40
94 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #32 background imageLoading...
Page #32 background image
Operation and use 2G40, 2G40 H
32
HATZ
Operator’s Manual
7 Operation and use
7.1 Safety notes
NOTICE
Comply with the safety chapter!
Follow the basic safety instructions in chapter 3 Safety, page 7.
WARNING
Danger of injury from damage and defects on the machine.
Do not take the machine into service if damage has been lo-
calized and identified.
Replace faulty components.
WARNING
Danger of injury from failure to follow the operating instruc-
tions and from performing unauthorized tasks on the ma-
chine.
Define the responsibilities of the personnel taking the ma-
chine into service.
Replace faulty machine parts immediately.
Check the installation conditions when the machine is first
taken into service and after the machine has been inactive
for a lengthy period.
CAUTION
Danger of engine damage from low load operation.
Operating the engine at no load or at very low load for an ex-
tended period can impair the running characteristics of the en-
gine.
Make sure that the engine load is at least 15%.
Before switching off the engine following low load operation,
briefly operate it at a considerably higher load.
CAUTION
If the force applied to the speed control lever and stop lever
exceeds permissible levels, this may cause damage to the
stops and inside regulator parts.
Please note the following picture.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Hatz 2G40 and is the answer not in the manual?

Hatz 2G40 Specifications

General IconGeneral
Displacement462 cm³
Cooling SystemAir-cooled
Compression Ratio20.5:1
Fuel TypeDiesel
Fuel SystemDirect injection
Starting SystemElectric starter
Engine Type1-cylinder 4-stroke diesel engine
Lubrication SystemForced lubrication

Related product manuals