2G40, 2G40 H Maintenance
HATZ
49Operator’s Manual
8 Maintenance
8.1 General maintenance instructions
Safety notes
WARNING
Danger of injury from failure to follow the operating instruc-
tions and from performing unauthorized tasks on the ma-
chine.
▪ Follow all instructions.
▪ Do not perform activities for which no qualification is avail-
able. Contact properly trained personnel if necessary.
NOTICE
Comply with the safety chapter!
Follow the basic safety instructions in chapter 3 Safety, page 7.
▪ Maintenance tasks may only be performed by trained personnel.
▪ Accident prevention measures must be in accordance with the local acci-
dent prevention regulations.
▪ Perform setting and maintenance work at the specified intervals.
▪ Replace faulty machine parts as soon as possible.
▪ Always wear personal protection equipment.
▪ Only use fully functional tools.
▪ Installation of unsuitable spare parts can lead to problems. We cannot ac-
cept responsibility for direct damage or secondary damage that results
from this.We therefore recommend the use of Hatz original spare parts.
▪ Closely adhere to the maintenance conditions prescribed in this manual.
▪ Only make changes to the machine in agreement with the manufacturer.
▪ Only perform maintenance work when the engine is stopped.
▪ Protect the starting key from unauthorized access.
▪ Disconnect the negative battery terminal before carrying out maintenance
work.
▪ Adhere to legal regulations when handling and disposing of used oil, fil-
ters, and cleaning agents.
▪ After completing maintenance work, check that all tools, bolts, aids, and
other objects are removed from the machine, and that all safety equipment
has been replaced.
To Next Page
Loading...
Need help?
General
