Hatz 2G40 User Manual

2G40, 2G40 H Maintenance
HATZ
51Operator’s Manual
2G40
= 1h
max
OIL
OIL
0,1 mm
0.004"
max
0000 040 096 02
500h
250h
8.2.2 Maintenance plan
In new and generally overhauled engines, after 25 operating hours:
▪ Changing the engine oil
▪ Check the tappet clearance and adjust if necessary.
▪ Checking the screw connections (do not retighten the screws for attaching
the cylinder head)
In case of a low number of operating hours, change the engine oil no later
than every 12 months, regardless of the actual number of operating hours.
The interval at which maintenance work should be performed on the fuel fil-
ter depends on the cleanliness of the fuel in use and may need to be short-
ened to 250 operating hours.

Hatz 2G40 Specifications

General

Displacement	462 cm³
Cooling System	Air-cooled
Compression Ratio	20.5:1
Fuel Type	Diesel
Fuel System	Direct injection
Starting System	Electric starter
Engine Type	1-cylinder 4-stroke diesel engine
Lubrication System	Forced lubrication