2G40, 2G40 H Operation and use
HATZ
43Operator’s Manual
Procedure
Step Activity
1 Turn the starting key to position "0".
The stop lever (3) is actuated in the "STOP" position with the
stop magnet (4).
The engine switches off.
All indicator lamps go out.
2 Remove the starting key.
3 Seal the ignition lock with the protective cap (1).
NOTICE
Danger of exhaustive battery discharge.
▪ When the machine is switched off, always turn the starting
key to position "0" or else the battery may become fully dis-
charged.
7.6 Check the oil level
Safety notes
CAUTION
Danger of burns.
There is a danger of burns when working on a hot engine.
▪ Wear safety gloves.
CAUTION
Danger of injury
Prolonged contact with engine oil can lead to irritation of the
skin.
▪ Wear safety gloves.
▪ If there is contact with the skin, thoroughly wash the af-
fected areas of the skin with soap and water.
To Next Page
Loading...
Need help?
General
