Hatz 2G40 User Manual

2G40, 2G40 H Technical data
HATZ
23Operator’s Manual
Oil viscosity
-40
-30
-20
-10
0
10
20
30
40
50
104
86
68
50
32
14
-4
-22
-40
OIL: SAE...
°C°F
5W/30
5W/40
10
W/
4
0
10W/3
0
15W
/
40
30
40
122
10
W
Choose the recommended viscosity based on the type of start (recoil,
crankhandle or electric) and on the engine temperature at which the engine
will be operated.
CAUTION
Engine damage from unsuitable engine oil.
Unsuitable engine oil considerably reduces engine service life.
Only use engine oil that fulfills the specifications stipulated
above.
4.5 Fuel
Fuel type
All types of diesel fuel that meet the minimum requirements of the following
specifications are suitable:
▪ Europe: EN 590
▪ UK: BS 2869 A1 / A2
▪ ASTM D 975-09a 1-D or 2-D
CAUTION
Danger of engine damage from low quality fuel.
The use of fuel that does not meet the specifications can lead to
engine damage.
▪ The use of fuel that does not meet specifications requires
approval by Motorenfabrik HATZ (main plant).

Hatz 2G40 Specifications

General

Displacement	462 cm³
Cooling System	Air-cooled
Compression Ratio	20.5:1
Fuel Type	Diesel
Fuel System	Direct injection
Starting System	Electric starter
Engine Type	1-cylinder 4-stroke diesel engine
Lubrication System	Forced lubrication